Data sheet

Power supplies & Voters

Compact Product Suite hardware selector

Space-saving power supplies intended for use with the control and I/O product lines with a selectable output of 3 - 40 A. Also available are relevant voters for redundant configurations.

The range also supports power supply configurations of the AC 800M and S800 I/O-based IEC 61508-SIL2 and SIL3-rated solutions. A Mains Breaker Kit for DIN Rail is also available for our power supplies and voters.

For updated information regarding this hardware please visit our Hardware Selector. In the hardware selector, you can compare different controllers, communication interfaces, I/O systems, I/O module termination units, network equipment, panels, power supplies & voters. Print your own PDF files or save an outline of all modules in the product area.

Below is an outline of the range of different power supplies and voters available.

Specific feature ¹ SD831 SD832 SD833 SD834
General info
Article number 3BSC610064R1 3BSC610065R1 3BSC610066R1 3BSC610067R1
Type Power supply
Rated output current 3 A 5 A 10 A 20 A
Rated output power 72 W 120 W 240 W 480 W
Rated output voltage d.c. 24 V
Rated input power 134/143 VA 240/283 VA 447/514 VA 547/568 VA
Mains/input voltage, nominal 100-240 V a.c. 110-300 V d.c. 100-120 V a.c. 200-240 V a.c. Auto-select input 100-240 V a.c. 110-150 V d.c.
Applications SELV and PELV
Efficiency 88/89.8 % 89.4/90.2 % 91/91.6 % 92.4/93.9 %
Dimensions
Width 32 mm (1.26") 60 mm (2.36") 82 mm(3.23")
Depth 102 mm (4.02") 117 mm (4.61") 127 mm(5.0")
Height 124 mm (4.88")
Weight (lbs.) 430 g (0.9 lbs.) 500 g (1.1 lbs.) 700 g (1.5 lbs.) 1200 g (2.6 lbs.)
Mounting spacing W mm 15 mm (0.59")
Mounting spacing H mm 40 mm (1.57")
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: compacthardwareselector.com
Specific feature ¹ SD853 SD854 SS823 SS832
General info
Article number 3BSE088188R1 3BSE088189R1 3BSE038226R1 3BSC610068R1
Type Power supply Voter and Over Voltage Protection Voter
Rated output current 10 A 20 A 10 A (20 A in parallel operation)
Rated output power 240 W 480 W -
Rated output voltage 24 V d.c. -
Rated input power 500 W 2 x 10 A
Mains/input voltage, nominal 100-240 V a.c. 110-150 V d.c. 1x24 V d.c. 2x24 V d.c.
Applications SELV and PELV -
Efficiency 93.6/95.2 % @ 120/230 V a.c. 92.4/95.6 % @120/230 V a.c. -
High integrity Yes
Dimensions
Width 39 mm (1.53") 48 mm (1.88") 116 mm(4.6") 32 mm (1.26")
Depth 117 mm (4.60") 127 mm (5.00") 145 mm (5.8") including connector 117 mm (4.61")
Height 124 mm (4.88") 132 mm (5.3") 125 mm (4.9")
Weight (lbs.) 600 g (1.32 lbs.) 830 g (1.83 lbs.) 870 g (1.9 lbs.) 350 g (0.77 lbs.)
Mounting spacing W mm 15 mm (0.59")
Mounting spacing H mm 40 mm (1.57") 30 mm (1.2") 25 mm (1")
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: compacthardwareselector.com
Specific feature ¹ SS855
General info
Article number 2PAA125624R1
Type Voter
Rated output current 40 A
Rated input current 2 x 20 A
Input voltage range 2* 8.4...36.4 V
Dimensions
Width 36 mm
Depth 127 mm
Height 124 mm
Weight (lbs.) 280 g
Mounting spacing W mm 5 mm
Mounting spacing H mm top 40 mm, bottom 20 mm
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: compacthardwareselector.com

Accessories

Specific feature ¹ Mains Breaker kit, DIN Rail SB822
General info
Article number 3BSE022262R1 3BSE018172R1
Type Mains Breaker kit Rechargeable battery unit
Rated output current 3 fused (6.3 A) double output terminals
Mains/input voltage, nominal 115/230 V
Rated output voltage 3.6 V
Dimensions
Width 102.5 mm (4.04") 85.8 mm (3.38")
Weight (lbs.) 0.5 kg (1.1 lbs.) 550 g (01.21 lbs.)
Depth 58.5 mm (2.3")
Height 136 mm (5.35") incl. hatch
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: compacthardwareselector.com

We reserve the right to make technical changes to the products or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not assume any responsibility for any errors or incomplete information in this document.

We reserve all rights to this document and the items and images it contains. The reproduction, disclosure to third parties or the use of the content of this document – including parts thereof – are prohibited without ABB’s prior written permission.

Copyright© 2024 ABB All rights reserved